Have one of the Hotest rides on the track with the CH-Race-Control Team Associated B6.1D 2wd Buggy Stock Kit. This kit comes with everything you need to be compettive in 2wd stock buggy racing. The Hobbywing 17.5 control motor that we have selected can be used at any Australian 2wd stock sanctioned events. Many of the products we have selected for this build we use in our own personal RC cars.
(WANT A ITEM CHANGED OR REMOVED ?? NO PROBLEMS LET US KNOW AND WE CAN SEND YOU A CUSTOME QUOTE)
Whats comes in the kit
- 1x Team Associated B6.1D 2wd Buggy
- 1x Hobbywing XR10 justock Stock
- 1x Hobby wing G3 17.5 Brushless motor
- 1x sesor cable for motor and esc
- 1x Intellect 4200mah 7.4v shorty lipo
- 1x set front and rear wheels
- 1x set of proline tires to suit your track of choice ( we will select the tire that we think works best)
- 1x pinion gear for stock racing
- 1x Savox SC1251MG Low Profile Digital "High Speed" Metal Gear Servo
- 1x flysky GT3B Remote control and receiver
- 1x 240v/12v lipo balance charger (fast charge)
- 1x charge leads and plugs
- 1x lipo safe bag
- 1x mylaps RC4 transponder
- tools for building
- green slime
- everything else is included.
Team Associated B6.1D 2wd Buggy
The Team Associated B6.1 2WD Buggy is the evolution of the World class proven B6 chassis. The new B6.1 will have updated parts and looks like a new rear end to help with traction on those slippery surfaces. More information will be added very soon so keep a eye out on this page :)
Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 17 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!
The engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.1 continues this theme. The B6.1 will be the choice for tracks with very high traction, where a forward mass is beneficial and chassis roll needs to be tamed through a low center of gravity and anti-roll bars. The B6.1D now has an all-new Lay Back Stealth(r) transmission that gives the car additional traction when exiting the corners. The addition of +1 Ackermann plates and gull wing suspension arms tune the steering for razor-sharp feel and control. Both cars have new features, including an easy-access differential, diff height adjustability, and an all-new slipper assembly, while the setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy #27402 motor, #27322 battery, #27004 ESC, #27109 servo, receiver, wheels, tires, and pinion gear. Assembly and painting required.
Easy-access ball differential
Differential height adjustment with 0, 1, 2, and 3mm inserts included
New slipper assembly for better weight balance and shock clearance
3-gear Lay Back Stealth(r) transmission for lower and rearward CG
Heavy-duty V2 routed graphite front shock tower with tower guard
Heavy-duty V2 routed graphite rear tower, long
Heavy-duty V2 rear axle with 67mm bones
V2 springs for a more reactive and nimble feel
Innovative rear arm with molded inserts for ultra-fine lower shock mount adjustment
Molded spur gear guard to help protect body from damage
+1 steering block arms optimize feel on dirt tracks
Battery strap allows the use of optional turnbuckle-based braces
Machined pistons included for better fit and smoother operation
Aluminum rear clamping hex and front axle with laser etching
Rear hubs feature large bearings and the easy-insert system to adjust camber link position and rear axle height
One-piece shock bushing to make assembly easier
Aluminum C and D arm mounts included for large range of anti-squat and toe adjustment
Lightweight aluminum top shaft
Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag)
JConcepts(r) B6 clear body and wing included
Hobbywing XR10 justock Stock
The Hobbywing Xerun XR10 Justock Speed Control Black is specifically designed for Zero-timing racing. Its timing system has been set to ZERO degree. Using the same branded motor and winding will ensure that every racer will have the same power system for 100% fair and competitive racing in stock class.
The modified heatsink, which increases the surface area, combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly transferred to the heatsink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.
Reliable hardware combined with advanced software technology allows the XR10 JUSTOCK to not only provide high power output, but also overload protection of the ESC circuit.
This ESC is designed for 1/10th scale touring cars & 1/12th scale pan cars as well as the ever popular F1 series cars for all Zero-timing spec racing, example the ROAR Sportsman class. When pairing this ESC with a 32T motor it will also form a professional and ideal combo for rock crawlers.
HobbyWing XeRun XR10 Justock Features:
High Reliability & Durability
High efficient Heat Dissipating System
Regular Firmware Updates - Free of Charge
Single-button Programming & Factory Reset
Cont./Peak Current: 60A/380A
Input: 2-3S LiPo/6-9 Cells NiMH
BEC Output: Linear Mode:6V/2A
Input Wires: Blue-14AWG-200mm*1/Black-14AWG-200mm*1
Output Wires: Red-14AWG-200mm*1/Yellow-14AWG-200mm*1/Orange-14AWG-200mm*1
Input Connectors: No
Output Connecotors: No
Fan Size: 25x25x10mm
Fan Voltage Range: 5-8.4V
WiFi Module: Supported
Hobby wing Xerun G3 V10 17.5T motor
sesor cable for motor and esc
Hobbywing 200mm Sensor cable is ideal for large rc cars that use a sensored brushless system
- 200mm long
- high qulaity
The Nvision Factory Pro Lipo 4500 100C 7.4V 2S Short packs are made by Team Orion. These packs are great for high performance Rc On road and off road vehicles.
INTELLECT 4200 MAH 7.6V 120C GRAPHENE LIPO BATTERY - SHORTY 2019 MODEL HV4 - INTL4200-2S-HV4
Pro-Line has you covered with lightweight and durable 4wd front and rear racing wheels for the Team Associated B64 buggy. The Wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels are slightly stiffer than the stock wheels which provide more consistent bump handling performance and faster lap times. The stock B64 wheels have been in short supply since launch, but now that Pro-Line’s got you covered you no longer have to worry about finding wheels! Order yours today!
Proline Hole Shot 2.0 2.2" M3 Soft are a must have tire in any true racers pit bag.
- High quality
- works on most track surfaces
- sticky compound
- great value
This is a pair of Hole Shot 2.0 2.2" Off-Road Buggy Tires. The Hole Shot is the tire that everyone turns to when looking for an edge over the competition because it just works, everywhere. Period. The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole-Shot design has won just about every title imaginable. Pro-Line's development staff is now proud to announce the Hole Shot 2.0. The 2.0 version features more pins and a wider contact patch for insane amounts of traction. The unique mini-pin design gives the optimum level of traction in dusty, hard-packed and grooved conditions. The Hole Shot 2.0 is a must have tire in everyone’s racing arsenal, so get some today!
31 tooth pinion gear for stock racing
Savox SC1251MG Low Profile Digital "High Speed" Metal Gear Servo
The Savox SC1251MG Low Profile Digital "High Speed" Metal Gear Servo is ideal for your pro level 1/10 2wd off road buggys.
Coreless Motor provides high speed, incredible efficiency, and low power consumption
The Aluminum Case design not only looks good but also allows for lower operating temperatures.
Totally Green – from materials to production, these servos are environmentally friendly.
Ideal as a steering servo for 1/10 surface applications, and as a aileron servo in gliders and airplanes that have thin wing profiles.
*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.
Speed @ 6.0V: .09
Torque @ 6.0V: 125 oz-in / 9.0 kg-cm
Type: Low Profile
Output Shaft: 25T Spline (Futaba)
Case: Aluminum Heatsink
Case Size (LxWxH): 40.8x20.2x25.4mm
flysky GT3B Remote control and receiver
FHDS (Automatic Frequency Hopping Digital System), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY. The system is specially developed for all the radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available on the market.
2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motors, electronic speed controller, servos and any metal to metal noise, eliminating interference and glitching that can affect traditional frequency systems.
Trainer Port (for VRC)
CE & FCC certified
240v/12v lipo balance charger (fast charge)
The GT Power High Performance Charger C607D AC/DC 7amp 80w is a simple yet powerful dual input multi-functional charger with built in Lithium polymer balancing (JST-XH) for up to 6S 22.2v high voltage Lithium batteries. the c607d is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly, LiHV) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Ni-Cd, Ni-MH, and Pb (lead acid) batteries. The c607d can also charge new high voltage lipo battery's.
This charger has been approved to be sold in Australia
Input power monitoring
Easy to program buttons
5 battery memory
Individual cell monitoring
2-Line Back lit LCD display
Built in Balancer to 6S packs
Includes "FAST" & "STORAGE" Li-xx programs
Battery internal resistance tester
Balancing current 300mAh/cell
Operating input voltage : 10 - 18V DC or 100-240V AC
Ni-Cad / Ni-MH : 1 - 15 Cells
Li-Ion / Li-Po / Li-Fe / LiHV : 1 - 6 Series
Charge current : 0.1 - 7.0A
Discharging current: 0.1 - 1.0A
PB / Lead Acid : 2 - 20V
Built in Cell Ballancer : Up to 6S (series) Li-Po (JST-XH connectors)
No. of Cycles : Up to 5 Cycles
charge leads and plugs
lipo safe bag
Keep your lipo battery's in this lipo safe charge bag. All ways charge your lipo battery's in a lipo safe bag and never leave unattended when charging.
- High quality
- large size
- store your lipos
mylaps RC4 transponder
The Mylaps RC4 Hybrid Transponder is used for timming at your local rc track. Each time you cross the loop or also known as the finish line the transponder counts a lap telling you how many laps you do in one race and what your average and fastest laps also.
RC transponders help you to track lap times and give better insight in your performance. They also measure the connected voltage and ambient car temperature. The Mylaps RC4 Hybrid transponder is compatible with older MYLAPS systems. It will provide you with a wide range of practice and race locations.
please not painted body and installed wheels and tires on the car do not come in this kit they are for illustration only. car will need assembling and body will need to be painted.
Standard Shipping - $12.00
Express shipping - $14.00
Express shipping available on most orders. Additional charges may apply to large orders or items deemed to be of a bulky shipping nature. Additional shipping charges may apply to some locations. You will be contacted if the above occurs. (please read our shipping policy for processing time and more information)
Free pick-up from store - $0.00
Pick up in store at 254 queen street Campbelltown 2560 Monday to Friday 9.30am to 5.30pm. You will be notified when your order is ready for pickup.
Be The First To Review This Product!
Help other campbelltown hobbies users shop smarter by writing reviews for products you have purchased.