Pre Order Team associated b6.2d and b6.2

On: 15 January 2020 

Campbelltown hobbies are now taking pre-orders fro the new Team associated b6.2d and b6.2. The B6.2 is the newest generation 2ed offroad buggy from Team associated.

Pre-order from the links below

https://www.campbelltownhobbies.com.au/team-associated-rc10-b6.2D-team-kit

https://www.campbelltownhobbies.com.au/team-associated-rc10-b6.2-team-kit-ass90023

 

 The Team Associated RC10 B6.2 Team 1/10 2wd Electric Buggy Kit carries on the AE tradition of domination. The B6.2 is the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance.

Combine this with high end features like an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a revised slipper assembly. The setups and tuning parts are interchangeable between the B6.2 and B6.2D configurations, and offer the speed, durability and lineage expected of a true champion.

NOTE: Painted body, electronics, wheels and tires shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model. 

 
Features:
  • Lightweight 7075-T6 hard anodized and +3mm increased length
  • Symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position
  • Longer rear arm (75mm) improves stability and jump landing
  • Outer rear hinge pin captured with bolt head and lock nut for increased durability
  • Updated left side rail with motor fan mount (fan not included)
  • Rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment
  • Front wing mount and front wing included
  • Bolt-on +1 steering block arms for improved steering response
  • 69mm CVA bones for reduced bone plunge and minimized friction at drive pin
  • Body design with lower center of mass - Clear body and wing included
  • 24g and 36g steel chassis weights included for improved balance and lower overall center of mass
  • 5mm aluminum clamping wheel hexes
  • Fluid filled gear differential
  • 3-gear Laydown Stealth® transmission for lower and forward CG
  • Differential height adjustment with 0, 1, 2, and 3mm inserts included
  • 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments
  • Heavy-duty V2 routed graphite front shock tower with tower guard
  • Heavy-duty V2 routed graphite rear tower, standard
  • V2 12mm Big Bore threaded aluminum shocks with X-rings
Specifications:
Scale: 1:10
Power: Electric
Length: 390mm (15.4")
Width: Varies*
Weight: 821g (1.81 lbs) (chassis only)
Wheelbase: Varies*
Transmission Ratio: 2.60:1
 
Needed to Complete:
  • 1:10 scale electric motor
  • Electronic speed control
  • 7.4V, 7.6V LiPo, 6.6V LiFe with "shorty" battery dimensions 
  • Battery charger 
  • 2-channel surface transmitter
  • 2-channel receiver
  • Steering servo
  • Polycarbonate-specific spray paint for body
  • 1:10 scale off-road wheels and tires
  • Pinion gear
  • Other helpful items: Silicone shock fluid, Silicone diff fluid, FT body scissors (#1737), FT body reamer (#1499), FT hex/nut driver set (#1519), CA tire adhesive (#1597), Hobby knife, Needle nose pliers, Wire cutters, Soldering iron, Calipers or a precision ruler
Share:

Leave a comment

Comments have to be approved before showing up