Description

 Specifications

 

Have the newest ride on the track with the CH-Race-Control Team Associated B74.2D 4wd Buggy Stock Kit. This kit comes with everything you need to be compettive in 4wd stock buggy racing. The Hobbywing 13.5 control motor that we have selected can be used at any Australian 4wd stock sanctioned events. Many of the products we have selected for this build we use in our own personal RC cars.

(WANT A ITEM CHANGED OR REMOVED ?? NO PROBLEMS LET US KNOW AND WE CAN SEND YOU A CUSTOME QUOTE)

Whats comes in the kit

  • 1x Team Associated B74.1D 4WD Buggy
  • 1x Hobbywing XR10 justock Stock
  • 1x Hobby wing G3 13.5 Brushless motor
  • 1x sesor cable for motor and esc
  • 1x Intellect 4200mah 7.4v shorty lipo
  • 1x set front and rear wheels
  • 1x set of proline tires to suit your track of choice ( we will select the tire that we think works best)
  • 1x pinion gear for stock racing
  • 1x Savox SA-1258TG Standard Digital "High Speed" Titanium Gear Servo
  • 1x flysky GT3B Remote control and receiver
  • 1x 240v/12v lipo balance charger (fast charge)
  • 1x charge leads and plugs
  • 1x lipo safe bag
  • 1x mylaps RC4 transponder

 

Items required

  • tools for building
  • glue
  • grease
  • green slime
  • everything else is included.

The off-road RC car racing scene has changed over the past few years, with turf and carpet racing becoming more popular and grip levels at an all-time high. The engineers inside Team Associated's Area 51 were quick to answer the 4WD class with the RC10B74 Team Kit, a completely new chassis configuration equipped with a long list of features designed to give you the winning edge.

The engineering continues. The B74.1 platform introduces the use of two separate chassis configurations. The B74.1 will be the buggy of choice for high grip carpet or turf track surfaces with its next-generation Octalock 2-Pad high-load, high-capacity, center slipper clutch and optimized carpet kit setup. The B74.1D is the buggy to choose for clay and dirt track surfaces with an included center differential with 200,000 CST silicone fluid and an optimized dirt kit setup.

Both kits utilize redesigned, low-profile shock towers with shorter shock shafts and bodies to lower the center of gravity, providing more predictable handling. Also included in both kits are new low roll center (LRC) C and D arm mounts, 66mm CVA bones and axles, and 2.0mm G10 fiberglass chassis brace supports, which all add up to making the B74.1 and B74.1D easier to drive, and easier to push hard on all track surfaces.

Setups and tuning parts are interchangeable between the B74.1 and B74.1D. Both versions come with the speed, durability, and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!

NEW Features
Center differential with 72T and 78T spur gears and 200,000 cSt silicone fluid
Includes 1.2mm and 1.3mm anti-roll bars front and rear for dirt
5.0mm rear hex adapters for wide stance with dirt tires
Includes updated kit setup with V2 spring package of Yellow front and Blue rear springs
Includes shorter 23mm front and 27.5mm V2 Big Bore threaded aluminum shocks with 12mm machined pistons and X-rings for lower CG, reduced weight, and improved performance
New 4mm graphite front shock tower lowered by 2mm with an additional row of tuning holes
New 4mm graphite rear shock tower lowered by 5.5mm for maximum stability and predictability
+3mm aluminum steering rack for optimized bump steer at low ride heights
66mm rear CVA driveshafts and axles for more on-power traction and a more predictable driving feel
New molded ESC tray for quick electronics removal for cleaning
New molded 30mm fan mount and hardware (fan not included)
UPDATED Features
Updated aluminum LRC C and D suspension mounts for more rear traction and better cornering balance
Increased flex with 2.0mm G10 chassis brace supports for more predictable rear traction and better bump handling
New simplified design 2.5mm graphite battery strap with indexed battery locations, easy height setup, and battery removal for both standard and low-profile shorty batteries
New low-profile molded plastic battery posts included in addition to standard posts
New 16mm differential outdrives with a more durable, lightweight design
Updated rear wing with optional low carpet racing trim line for reduced drag in high traction
Updated symmetric rear arms with new shock mounting position (farther inside) for increased rear traction on dirt
Updated plastic rear hub for more durability on the upper link mount. RC10B74.1 hubs continue with the aluminum rear hub link mount and axle height adjustment in 1mm increments for fine tuning.
Updated 2.5mm graphite steering arms for increased durability
Updated plastic steering blocks with 5x12mm outer ball bearing with steel bearing tubes for improved durability
Updated V2 2mm hard-anodized 7075-T6 aluminum chassis with spur gear clearance and updated mount holes for ESC tray
LEGACY B74 Features
7075-T6 aluminum bulkheads with quick-change 0mm-3mm adjustable differential height for low ride-height on carpet while maintaining efficient driveshaft alignment
Car design allows use of center differential or slipper clutch without changing center driveshafts
Easy access to differentials for worry-free maintenance and adjustment
7075-T6 aluminum arm mounts use inserts for fine tuning a large range of anti-squat, kick-up, and toe adjustments
Front and rear anti-roll bars use a common shape for minimal spare part count
7075-T6 aluminum sliding motor mount and center bulkhead with increased rigidity for more accurate gear mesh
7075-T6 aluminum 9-degree caster blocks
Floating servo mount with 7075-T6 aluminum mount and 2.5mm graphite brace
Lightweight clear body and wing included
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, and pinion gear. Assembly and painting required.

This vehicle needs extra parts to make it operational. Click on the Specifications tab to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.

Hobbywing XR10 justock Stock

The Hobbywing Xerun XR10 Justock Speed Control Black is specifically designed for Zero-timing racing. Its timing system has been set to ZERO degree. Using the same branded motor and winding will ensure that every racer will have the same power system for 100% fair and competitive racing in stock class.

The modified heatsink, which increases the surface area, combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly transferred to the heatsink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.


Reliable hardware combined with advanced software technology allows the XR10 JUSTOCK to not only provide high power output, but also overload protection of the ESC circuit.

This ESC is designed for 1/10th scale touring cars & 1/12th scale pan cars as well as the ever popular F1 series cars for all Zero-timing spec racing, example the ROAR Sportsman class. When pairing this ESC with a 32T motor it will also form a professional and ideal combo for rock crawlers.

HobbyWing XeRun XR10 Justock Features:

    High Reliability & Durability
    Zero-timing Design
    High efficient Heat Dissipating System
    Small Footprint
    Regular Firmware Updates - Free of Charge
    Single-button Programming & Factory Reset

Spec Check:

    Scale: 1/10th
    Brushed/Brushless:BL
    Sensored/Sensorless: SD
    Waterproof: No
    Cont./Peak Current: 60A/380A
    Input: 2-3S LiPo/6-9 Cells NiMH
    BEC Output: Linear Mode:6V/2A
    Input Wires: Blue-14AWG-200mm*1/Black-14AWG-200mm*1
    Output Wires: Red-14AWG-200mm*1/Yellow-14AWG-200mm*1/Orange-14AWG-200mm*1
    Input Connectors: No
    Output Connecotors: No
    Fan Size: 25x25x10mm
    Fan Voltage Range: 5-8.4V
    WiFi Module: Supported
    Size: 33.0x28.0x31.5mm
    Weight: 46g

 

Hobby wing Xerun G3 V10 13.5T motor

 

sesor cable for motor and esc

Hobbywing 200mm Sensor cable is ideal for large rc cars that use a sensored brushless system

  • 200mm long
  • high qulaity

 

The Nvision Factory Pro Lipo 4500 100C 7.4V 2S Short packs are made by Team Orion. These packs are great for high performance Rc On road and off road vehicles.

 

INTELLECT 4200 MAH 7.6V 120C GRAPHENE LIPO BATTERY - SHORTY 2019 MODEL HV4 - INTL4200-2S-HV4

For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.

Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.

2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.

To address market demands 2 options nominally are available Hi Power and Long RunTime.

BRCA/EFRA Legal as of April 2019

 

  • Long Runtime
  • 18.5H x 47W x 93L mm
  • 4200mAh
  • 120C
  • 155g
  • 5mm Plugs


Connectors and balance lead supplied.

Read all instructions before use.

Proline wheels

Pro-Line has you covered with lightweight and durable 4wd front and rear racing wheels for the Team Associated B64 buggy. The Wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels are slightly stiffer than the stock wheels which provide more consistent bump handling performance and faster lap times. The stock B64 wheels have been in short supply since launch, but now that Pro-Line’s got you covered you no longer have to worry about finding wheels! Order yours today!

Proline tires

Proline Hole Shot 2.0 2.2" M3 Soft are a must have tire in any true racers pit bag.

  • High quality
  • works on most track surfaces
  • sticky compound
  • great value

This is a pair of Hole Shot 2.0 2.2" Off-Road Buggy Tires. The Hole Shot is the tire that everyone turns to when looking for an edge over the competition because it just works, everywhere. Period. The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole-Shot design has won just about every title imaginable. Pro-Line's development staff is now proud to announce the Hole Shot 2.0. The 2.0 version features more pins and a wider contact patch for insane amounts of traction. The unique mini-pin design gives the optimum level of traction in dusty, hard-packed and grooved conditions. The Hole Shot 2.0 is a must have tire in everyone’s racing arsenal, so get some today!

25 tooth pinion gear for stock racing

 

Savox SA-1258TG Standard Digital "High Speed" Titanium Gear Servo


Features:

    Light weight
    Coreless Motor provides high speed, incredible efficiency, and low power consumption
    The Aluminum Case design not only looks good but also allows for lower operating temperatures.
    Totally Green – from materials to production, these servos are environmentally friendly.
    Ideal as a steering servo for 1/10 surface applications, and as a aileron servo in gliders and airplanes that have thin wing profiles.

*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.

Specifications:
 

flysky GT3B Remote control and receiver

FHDS (Automatic Frequency Hopping Digital System), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY. The system is specially developed for all the radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available on the market.

2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motors, electronic speed controller, servos and any metal to metal noise, eliminating interference and glitching that can affect traditional frequency systems.

Key Features
Model Memory
Servos NOR/REV
Steering Trim
Throttle Trim
Dual Rate
End Point
ABS Settings
EXP Settings
Trainer Port (for VRC)
CE & FCC certified

 

240v/12v lipo balance charger (fast charge)

The GT Power High Performance Charger C607D AC/DC 7amp 80w is a simple yet powerful dual input multi-functional charger with built in Lithium polymer balancing (JST-XH) for up to 6S 22.2v high voltage Lithium batteries. the c607d is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly, LiHV) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Ni-Cd, Ni-MH, and Pb (lead acid) batteries. The c607d can also charge new high voltage lipo battery's.

 

This charger has been approved to be sold in Australia

Features
    Capacity Limit
    Maximum safety
    Temperature monitoring
    Input power monitoring
    Easy to program buttons
    5 battery memory
    Individual cell monitoring
    2-Line Back lit LCD display
    Built in Balancer to 6S packs
    Cycle charging/discharging
    Includes "FAST" & "STORAGE" Li-xx programs
    Battery internal resistance tester

Product Details
    Output 80W
    Discharge 5W
    Balancing current 300mAh/cell
    Operating input voltage : 10 - 18V DC or 100-240V AC
    Ni-Cad / Ni-MH : 1 - 15 Cells
    Li-Ion / Li-Po / Li-Fe / LiHV : 1 - 6 Series
    Charge current : 0.1 - 7.0A
    Discharging current: 0.1 - 1.0A
    PB / Lead Acid : 2 - 20V
    Built in Cell Ballancer : Up to 6S (series) Li-Po (JST-XH connectors)
    No. of Cycles : Up to 5 Cycles
 

charge leads and plugs

lipo safe bag

Keep your lipo battery's in this lipo safe charge bag. All ways charge your lipo battery's in a lipo safe bag  and never leave unattended when charging.

  • High quality
  • large size
  • store your lipos

mylaps RC4 transponder

The Mylaps RC4 Hybrid Transponder is used for timming at your local rc track. Each time you cross the loop or also known as the finish line the transponder counts a lap telling you how many laps you do in one race and what your average and fastest laps also.

 

RC transponders help you to track lap times and give better insight in your performance. They also measure the connected voltage and ambient car temperature. The Mylaps RC4 Hybrid transponder is compatible with older MYLAPS systems. It will provide you with a wide range of practice and race locations.

 

please not painted body and installed wheels and tires on the car do not come in this kit they are for illustration only. car will need assembling and body will need to be painted.

Read More...



others also bought
More from this category
In Stock
Stock Location
Filters