Description

Specifications

Hobbywing 30120301 QuicRun 880 Waterproof Dual Brushed Crawling ESC

Hobbywing QuicRun 880 Waterproof Dual Brushed Crawling ESC. 

Features:

  • Fully waterproof design for all conditions. (Note: Please clean and dry it after use for avoiding rusty connectors).
  • HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heat sink for great heat dissipation.
  • Built-in switch-mode BEC with cont. current of 4A.
  • Tunable drag brake and drag brake rate for different vehicles, tracks, and control feel.
  • Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel.
  • 9 levels of acceleration/ punch from soft to aggressive for different vehicles, tires and tracks.
  • Proportional brake with 9 levels of initial brake force, maximum brake force, and drag brake force.
  • Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection.
  • Separate programming port to easily connect the LED program card to the ESC.
  • ESC programming via HOBBYWING LED Program Card. 

 

Specifications:

  • Cont./Peak Current: 80A/400A
  • Motor Type Supported: Brushed Motor (540, 550, 775 Size Motor)
  • Applicable Car: 1/10th Vehicles & MOA style comp crawlers
  • Motor Limit:
    • Brushed Motor Limit with 2S LiPo /6S NiMH: ≥ 12T or RPM<30000@7.4V (540, 550 Size Motors)
    • Brushed Motor Limit with 3S LiPo /9S NiMH: ≥ 18T or RPM<20000@7.4V (540, 550 Size Motors)
    • Brushed Motor Limit with 4S LiPo /12S NiMH: ≥ 24T or RPM<15000@7.4V (540, 550 Size Motors)
  • LiPo / NiMH Cells: 2-4S LiPo or 5-12S NiMH
  • BEC Output: 6A@4A (Switch-Mode)
  • Connectors: Input End: No Connectors; Output End: 4.0mm Female Bullet Connectors
  • Size/ Weight: 45.9x34.7x26.5mm/ 75g
  • Programming Port: Separate Port
  • Waterproof: Yes

 

NOTE: WP-880-DUAL BRUSHED ESC has two outputs to drive 2 motors. When driving 2 motors simultaneously, the Turn of the motors needs to be increased.

Read More...



In Stock
Stock Location