The Team Associated RB10 Factory Team Retro Kit combines classic off-road buggy styling with proven B5 engineering, delivering an old-school appearance backed by modern durability, adjustability and Factory Team components.

Built around a rear-motor layout, the RB10 Factory Team Retro provides familiar rear-motor handling characteristics while incorporating updated materials and race-ready components from Team Associated's B5 platform.

At the heart of the buggy is a distinctive Retro Bronze anodised aluminium B5 tub chassis, matched with a Retro Bronze aluminium front nose plate and Bronze aluminium motor plate. Exclusive grey moulded plastics are used throughout, creating an unmistakable vintage-inspired appearance.

Completing the retro styling is an authentic Viper body together with a high-downforce 5.5-inch retro rear wing. The kit also includes 12mm hex dish wheels, allowing drivers to select tyres suited to their preferred racing surface.

Underneath the vintage-inspired body, the RB10 Factory Team Retro features serious competition hardware. Kashima-coated 13mm Big Bore coil-over shocks provide smooth suspension control and extensive tuning capability, while fully adjustable suspension geometry allows the chassis to be fine-tuned for different track conditions.

Power is delivered through the B5 rear-motor Stealth transmission with a 2.6:1 gearbox ratio and sealed B5 ball differential. Rear CVA driveshafts provide additional durability, while the adjustable V2 slipper system allows power delivery to be tuned to suit available traction.

Rugged steel turnbuckles provide adjustable camber and front toe-in, while vertical ball ends at the front and rear provide additional roll centre adjustment. Metric hardware and full ball bearings are included throughout the kit.

The result is a buggy that captures the look, feel and attitude of classic RC racing without giving up the tuning capability and performance of a more modern Team Associated platform.

Available from Campbelltown Hobbies, the Team Associated RB10 Factory Team Retro Kit is ideal for racers, collectors and enthusiasts looking for genuine retro styling combined with proven B5 engineering.

Required Items

• Battery
• Motor
• Electronic Speed Controller (ESC)
• Steering Servo
• Radio
• Receiver
• Battery Charger
• Tyres

Specifications

Brand: Team Associated
Model: RB10 Factory Team Retro Kit
Vehicle Type: Off-Road Buggy
Power Source: Electric
Drive Layout: Rear Motor
Chassis: B5 Aluminium Tub Chassis
Chassis Finish: Retro Bronze Anodised
Front Nose Plate: Retro Bronze Aluminium
Motor Plate: Bronze Aluminium
Plastics: Exclusive Grey Moulded Plastics
Transmission: B5 Rear-Motor Stealth Transmission
Gearbox Ratio: 2.6:1
Differential: Sealed B5 Ball Differential
Slipper: Adjustable V2 Slipper System
Rear Driveshafts: CVA
Shocks: 13mm Kashima-Coated Big Bore Coil-Over
Suspension Geometry: Fully Adjustable
Turnbuckles: Steel
Camber: Adjustable
Front Toe-In: Adjustable
Roll Centre: Adjustable Front & Rear via Vertical Ball Ends
Wheel Hex: 12mm
Wheels: 12mm Hex Dish Wheels
Tyres: Not Included
Body: Authentic Retro Viper Body
Rear Wing: 5.5" High-Downforce Retro Wing
Hardware: Metric
Bearings: Full Ball Bearings

Key Features

• Retro styling combined with proven B5 engineering
• Rear-motor chassis layout
• New Retro Bronze aluminium B5 tub chassis
• New Retro Bronze aluminium front nose plate
• New Bronze aluminium motor plate
• New front and rear moulded bulkhead parts
• Exclusive grey plastics throughout
• Authentic retro Viper body
• High-downforce 5.5" retro wing
• 12mm hex dish wheels
• Kashima-coated 13mm Big Bore coil-over shocks
• B5 rear-motor Stealth transmission
• Rear CVA driveshafts
• 2.6:1 ratio gearbox
• Sealed B5 ball differential
• Adjustable V2 slipper system
• Rugged steel turnbuckles
• Adjustable camber
• Adjustable front toe-in
• Fully adjustable suspension geometry
• Front and rear roll centre adjustment
• Vertical ball ends
• Metric hardware throughout
• Full ball bearings included

What's Included

• Team Associated RB10 Factory Team Retro Kit
• Retro Bronze B5 Aluminium Tub Chassis
• Retro Bronze Aluminium Front Nose Plate
• Bronze Aluminium Motor Plate
• Grey Moulded Components
• Authentic Retro Viper Body
• 5.5" High-Downforce Retro Wing
• 12mm Hex Dish Wheels
• 13mm Kashima Big Bore Shocks
• B5 Rear-Motor Stealth Transmission
• B5 Ball Differential
• Rear CVA Driveshafts
• V2 Slipper System
• Full Ball Bearings

Frequently Asked Questions – Team Associated RB10 Factory Team Retro Kit

What is the Team Associated RB10 Factory Team Retro Kit?

The Team Associated RB10 Factory Team Retro Kit combines classic off-road buggy styling with proven B5 engineering, modern adjustability and Factory Team components.

Is the Team Associated RB10 Factory Team Retro a rear-motor buggy?

Yes. The RB10 Factory Team Retro uses a rear-motor layout together with a B5 rear-motor Stealth transmission.

What chassis does the RB10 Factory Team Retro use?

The buggy features a Retro Bronze anodised aluminium B5 tub chassis together with a matching Retro Bronze aluminium front nose plate and Bronze aluminium motor plate.

What shocks are included with the Team Associated RB10 Factory Team Retro?

The kit includes 13mm Kashima-coated Big Bore coil-over shock absorbers.

What differential does the RB10 Factory Team Retro use?

The RB10 Factory Team Retro uses a sealed B5 ball differential with a 2.6:1 ratio gearbox.

Does the RB10 Factory Team Retro have an adjustable slipper clutch?

Yes. An adjustable V2 slipper system is included to allow power delivery to be tuned for different track conditions.

What body is included with the RB10 Factory Team Retro Kit?

The kit includes an authentic retro Viper body together with a high-downforce 5.5-inch retro rear wing.

Are wheels and tyres included with the RB10 Factory Team Retro?

The kit includes 12mm hex dish wheels. Tyres are not included and must be selected separately to suit your preferred racing surface.

What electronics are required to complete the Team Associated RB10 Factory Team Retro Kit?

You will need a motor, ESC, steering servo, radio, receiver, battery and compatible battery charger.

Can the suspension geometry be adjusted?

Yes. The RB10 Factory Team Retro features fully adjustable suspension geometry, steel turnbuckles for camber and front toe-in adjustment, and vertical ball ends for front and rear roll centre adjustments.

Does the Team Associated RB10 Factory Team Retro include ball bearings?

Yes. Full ball bearings are included throughout the kit.

Who is the Team Associated RB10 Factory Team Retro Kit suited to?

The RB10 Factory Team Retro Kit is suited to racers, collectors and RC enthusiasts who want classic buggy styling combined with proven B5 engineering and modern chassis adjustability.