.png)
On Sale
6% OFF
SKU: HW38040302
Hobbywing 38040302 XRotor micro 4in1 ESC & FC (BL32/F4 G3)
$200.05
or 4 payments of $50.01 with
Info
Price Matchup
Description
The Hobbywing XRotor Micro 4-in-1 ESC and F4 G3 Flight Controller Combo is composed of HWA31003001 & HWA30902063.
Flight Controller Features:
- STM32 F405 MCU.
- Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipment
- The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted
- Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software (Note: the OSD is controlled by the F4 MCU)
- The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race
- F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily
- Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc
- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC
- Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed)
- Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft
- Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters
- Switch module of board load graphic transmission(VTX) can use remote contorl to control switch of graphic transmission
ESC Features:
- BLHeli_32 DShot 1200 ESC
- Dual 5V BEC Outputs
- Voltmeter Module
- Rubber Isolated Mounts
Flight Controller Specifications:
Specifications:
Continuous Current: 60A
Input Voltage: 3s-6s LiPo
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm
Supported Firmware: BLHeli_S32
Weight: 15g
4-in-1 ESC Specifications:
Continuous Current: 60A
Input Voltage: 3s-6s LiPo
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm
Supported Firmware: BLHeli_S32
Weight: 15g
Description
SpecificationsThe Hobbywing XRotor Micro 4-in-1 ESC and F4 G3 Flight Controller Combo is composed of HWA31003001 & HWA30902063.
Flight Controller Features:
- STM32 F405 MCU.
- Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipment
- The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted
- Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software (Note: the OSD is controlled by the F4 MCU)
- The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race
- F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily
- Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc
- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC
- Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed)
- Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft
- Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters
- Switch module of board load graphic transmission(VTX) can use remote contorl to control switch of graphic transmission
ESC Features:
- BLHeli_32 DShot 1200 ESC
- Dual 5V BEC Outputs
- Voltmeter Module
- Rubber Isolated Mounts
Flight Controller Specifications:
Specifications:
Continuous Current: 60A
Input Voltage: 3s-6s LiPo
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm
Supported Firmware: BLHeli_S32
Weight: 15g
4-in-1 ESC Specifications:
Continuous Current: 60A
Input Voltage: 3s-6s LiPo
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm
Supported Firmware: BLHeli_S32
Weight: 15g
More from this category
![Fujimi 1/24 Toyota Cresta 2.5GT Twin Turbo (ID-122) Plastic Model Kit [03957]](/assets/na_L.gif)
Fujimi 1/24 Toyota Cresta 2.5GT Twin Turbo (ID-122) Plastic Model Kit [03957]
SKU: FUJ03957
$42.29 10% off RRP
On Sale
10% OFF
Description
The Hobbywing XRotor Micro 4-in-1 ESC and F4 G3 Flight Controller Combo is composed of HWA31003001 & HWA30902063.
Flight Controller Features:
- STM32 F405 MCU.
- Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipment
- The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted
- Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software (Note: the OSD is controlled by the F4 MCU)
- The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race
- F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily
- Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc
- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC
- Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed)
- Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft
- Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters
- Switch module of board load graphic transmission(VTX) can use remote contorl to control switch of graphic transmission
ESC Features:
- BLHeli_32 DShot 1200 ESC
- Dual 5V BEC Outputs
- Voltmeter Module
- Rubber Isolated Mounts
Flight Controller Specifications:
Specifications:
Continuous Current: 60A
Input Voltage: 3s-6s LiPo
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm
Supported Firmware: BLHeli_S32
Weight: 15g
4-in-1 ESC Specifications:
Continuous Current: 60A
Input Voltage: 3s-6s LiPo
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm
Supported Firmware: BLHeli_S32
Weight: 15g
Specifications
| SKU | HW38040302 |
| Brand | HOBBYWING |
| Shipping Weight | 0.0300kg |
| Shipping Width | 0.080m |
| Shipping Height | 0.010m |
| Shipping Length | 0.080m |
| Shipping Cubic | 0.000064000m3 |
Stock Location
-
Store StockBackorder
-
Warehouse StockIn Stock
In-stock items and stock levels are subject to continuous change; if a stock error occurs, you will be notified by our team. Items located in the (STORE) are dispatched within 1 to 3 working days. (WAREHOUSE) items may require an additional 1 to 4 working days for processing before dispatch. For items in our (INTERNATIONAL) warehouse, an extra 5 to 10 days of processing time may be required. In the event your order contains items from multiple warehouses, it will be held until all items have arrived in our store for shipment. Rest assured, our goal is to ensure you receive your orders as quickly and as safely as possible.
Have a Question?
Price Matchup
Have a Question?
FAQ