.png)
Evergreen 9230 White Polystyrene Sheet 0.030 x 11 x 14" / 0.76mm x 28cm x 36cm (8)
SKU: EVE-09230
$68.32 5% off RRP
On Sale
5% OFF
On Sale
5% OFF
SKU: LOS04011V2
Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR - LOS04011V2
$949.99
or 4 payments of $237.50 with
Info
Price Matchup
Description
Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR - LOS04011V2
Product Information
This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.
If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.
Centre and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
What's In The Box
- (1) 8IGHT 4WD Nitro Truggy RTR
- (1) Spektrum SLT 3-Channel SLT Radio System
- (1) Dynamite 1600mAh 6V NiMH receiver pack
- (4) AA Transmitter Batteries
- (1) 4-Way Cross Wrench
- (1) Product Manual
What You Need
- 20-30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
Features
- Your fast track to nitro truggy racing
- Spektrum SLT 3-Channel SLT Radio System
- Spektrum SLR300 Surface Receiver
- Spektrum™ S614 Waterproof Metal Gear Surface Servo, 23T
- 4mm 6061-T6 Aluminium Chassis Plate
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Centre and rear dogbones
- 15mm adjustable oil-filled shocks
Product Specifications
- Final Drive Ratio: 15.03:1
- Pinion: 13T
- Scale: 1/8
- Approximate Assembly Time: No assembly required
- Fuel Tank Capacity: 4.2oz (125cc)
- Power Type: Glow
- Radio: Included
- Gear Pitch: 1.0 Module
- Receiver: Included
- Drivetrain: 4WD
- Body: Painted and screen printed
- Spur Gear: 50T
- Battery: Included
- Completion Level: Ready-To-Run
- Internal Gear Ratio: 3.91:1
- Suspension: 4-wheel independent
- Brakes: Dual disc
- Product Width: 16.38" (416 mm)
- Chassis: 4mm 6061 T-6 aluminum
- Vehicle Type: Truggy
- Ball Bearings: Full set
- Charger: Sold Separately
- Wheelbase: 14.93" (379 mm)
- Differential: Fluid filled gear type
- Product Height: 7.3" (185 mm)
- Product Length: 18.75" (476 mm)
- Servos:Included
- Shock Type: Composite body
Description
SpecificationsLosi 8IGHT-T Nitro 1/8 4WD Truggy RTR - LOS04011V2
Product Information
This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.
If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.
Centre and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
What's In The Box
- (1) 8IGHT 4WD Nitro Truggy RTR
- (1) Spektrum SLT 3-Channel SLT Radio System
- (1) Dynamite 1600mAh 6V NiMH receiver pack
- (4) AA Transmitter Batteries
- (1) 4-Way Cross Wrench
- (1) Product Manual
What You Need
- 20-30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
Features
- Your fast track to nitro truggy racing
- Spektrum SLT 3-Channel SLT Radio System
- Spektrum SLR300 Surface Receiver
- Spektrum™ S614 Waterproof Metal Gear Surface Servo, 23T
- 4mm 6061-T6 Aluminium Chassis Plate
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Centre and rear dogbones
- 15mm adjustable oil-filled shocks
Product Specifications
- Final Drive Ratio: 15.03:1
- Pinion: 13T
- Scale: 1/8
- Approximate Assembly Time: No assembly required
- Fuel Tank Capacity: 4.2oz (125cc)
- Power Type: Glow
- Radio: Included
- Gear Pitch: 1.0 Module
- Receiver: Included
- Drivetrain: 4WD
- Body: Painted and screen printed
- Spur Gear: 50T
- Battery: Included
- Completion Level: Ready-To-Run
- Internal Gear Ratio: 3.91:1
- Suspension: 4-wheel independent
- Brakes: Dual disc
- Product Width: 16.38" (416 mm)
- Chassis: 4mm 6061 T-6 aluminum
- Vehicle Type: Truggy
- Ball Bearings: Full set
- Charger: Sold Separately
- Wheelbase: 14.93" (379 mm)
- Differential: Fluid filled gear type
- Product Height: 7.3" (185 mm)
- Product Length: 18.75" (476 mm)
- Servos:Included
- Shock Type: Composite body
More from this category
Description
Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR - LOS04011V2
Product Information
This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.
If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.
Centre and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
What's In The Box
- (1) 8IGHT 4WD Nitro Truggy RTR
- (1) Spektrum SLT 3-Channel SLT Radio System
- (1) Dynamite 1600mAh 6V NiMH receiver pack
- (4) AA Transmitter Batteries
- (1) 4-Way Cross Wrench
- (1) Product Manual
What You Need
- 20-30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
Features
- Your fast track to nitro truggy racing
- Spektrum SLT 3-Channel SLT Radio System
- Spektrum SLR300 Surface Receiver
- Spektrum™ S614 Waterproof Metal Gear Surface Servo, 23T
- 4mm 6061-T6 Aluminium Chassis Plate
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Centre and rear dogbones
- 15mm adjustable oil-filled shocks
Product Specifications
- Final Drive Ratio: 15.03:1
- Pinion: 13T
- Scale: 1/8
- Approximate Assembly Time: No assembly required
- Fuel Tank Capacity: 4.2oz (125cc)
- Power Type: Glow
- Radio: Included
- Gear Pitch: 1.0 Module
- Receiver: Included
- Drivetrain: 4WD
- Body: Painted and screen printed
- Spur Gear: 50T
- Battery: Included
- Completion Level: Ready-To-Run
- Internal Gear Ratio: 3.91:1
- Suspension: 4-wheel independent
- Brakes: Dual disc
- Product Width: 16.38" (416 mm)
- Chassis: 4mm 6061 T-6 aluminum
- Vehicle Type: Truggy
- Ball Bearings: Full set
- Charger: Sold Separately
- Wheelbase: 14.93" (379 mm)
- Differential: Fluid filled gear type
- Product Height: 7.3" (185 mm)
- Product Length: 18.75" (476 mm)
- Servos:Included
- Shock Type: Composite body
Specifications
| SKU | LOS04011V2 |
| Barcode # | 605482767948 |
| Brand | Losi |
| Shipping Weight | 0.0300kg |
| Shipping Width | 0.080m |
| Shipping Height | 0.010m |
| Shipping Length | 0.080m |
| Shipping Cubic | 0.000064000m3 |
Stock Location
-
Store StockBackorder
-
Warehouse StockBackorder
In-stock items and stock levels are subject to continuous change; if a stock error occurs, you will be notified by our team. Items located in the (STORE) are dispatched within 1 to 3 working days. (WAREHOUSE) items may require an additional 1 to 4 working days for processing before dispatch. For items in our (INTERNATIONAL) warehouse, an extra 5 to 10 days of processing time may be required. In the event your order contains items from multiple warehouses, it will be held until all items have arrived in our store for shipment. Rest assured, our goal is to ensure you receive your orders as quickly and as safely as possible.
Have a Question?
Price Matchup
Have a Question?
FAQ