Description
R1 Wurks 040007 Digital 3 Speed Controller
R1 WURKS DIGITAL 3 SPEED CONTROLLER
ROAR APPROVED!
Note: This ESC no longer supports 1S Batteries (1/12th) via B.E.C. An additional voltage booster must be installed.
FEATURES
- Full aluminium case and heat sink design
- Full compatibility with modified and stock racing
- Superlative FET and low-resistance power PCB design
- 30mm fan for maximum cooling
- Software/hardware upgrades increase speed by reducing motor temperature by modifying the commutation algorithm
- New turbo / boost timing setting and delay time setting
- New brake response mode and PWM / brake frequency allows various race and control types
- Data port for connecting to WiFi module
- WiFi module allows program parameter settings and firmware upgrades
- ESC and motor telemetry (speed, temperature, current, voltage, RPM and battery consumption) can be stored in real time with the data log
Programmable Items
- Model Type
- Select Battery
- Cut Off Voltage
- Power Curve
- Boost Max+TB
- Boost-TH. Limit
- Boost Min-rpm
- Boost Max-rpm
- Turbo Delay
- Turbo + Slope
- Turbo - Slope
- Acceleration
- Start Power
- Smooth Start Rate
- Smooth Start Range
- Reverse Function
- Reverse Delay
- M- Reverse Amount
- Neutral Width
- Motor Direction
- Brake Response
- FAN Control
- Drag Brake
- Min Brake Amount
- Mid Brake Amount
- Mid Brake Location
- Max Brake Amount
- Soft Brake
- Brake Freq
- Motor Freq
- Drag Freq
- Cut Off Temp
- Cut Off M-Temp
- B.E.C Voltage
- Motor Pole Num
- Gear Ratio
- Tire Diameter
- Motor-Wiring
- Units
- Download
- Factory Setting
- Current Voltage
- Current Temp
- Max Temperature
- Motor Temp
- Motor Max Temp
- Max Current
- Maximum Speed
- Maximum RPM
- Error History
Specification
- Motor Type - Sensored / 4Pole Sensored
- Motor Limit - >3.5T
- Operating voltage - 3.7-7.4V
- Forward / Brake / Reverse - yes
- Full aluminum case / heatsink - yes
- Typ. Voltage Drop @20A per phase - 0.0048V
- Rated Current per phase - 2549A
- Plugged 30x30x10mm Fan - yes
- BEC Output - 6V/7.4V Bulit-in DC Booster, Continuous Current of 3A
- Multi-Protection-System - yes
- “Boost 0” Mode - yes
- Multi-frequency system - yes
- Power Wires - 12Awg
- USB Software Updateability - yes
- Case Size(with out fan) - 32.9 x 34.6 x 21mm
- Weight(with out cable) - 50g
Description
SpecificationsR1 Wurks 040007 Digital 3 Speed Controller
R1 WURKS DIGITAL 3 SPEED CONTROLLER
ROAR APPROVED!
Note: This ESC no longer supports 1S Batteries (1/12th) via B.E.C. An additional voltage booster must be installed.
FEATURES
- Full aluminium case and heat sink design
- Full compatibility with modified and stock racing
- Superlative FET and low-resistance power PCB design
- 30mm fan for maximum cooling
- Software/hardware upgrades increase speed by reducing motor temperature by modifying the commutation algorithm
- New turbo / boost timing setting and delay time setting
- New brake response mode and PWM / brake frequency allows various race and control types
- Data port for connecting to WiFi module
- WiFi module allows program parameter settings and firmware upgrades
- ESC and motor telemetry (speed, temperature, current, voltage, RPM and battery consumption) can be stored in real time with the data log
Programmable Items
- Model Type
- Select Battery
- Cut Off Voltage
- Power Curve
- Boost Max+TB
- Boost-TH. Limit
- Boost Min-rpm
- Boost Max-rpm
- Turbo Delay
- Turbo + Slope
- Turbo - Slope
- Acceleration
- Start Power
- Smooth Start Rate
- Smooth Start Range
- Reverse Function
- Reverse Delay
- M- Reverse Amount
- Neutral Width
- Motor Direction
- Brake Response
- FAN Control
- Drag Brake
- Min Brake Amount
- Mid Brake Amount
- Mid Brake Location
- Max Brake Amount
- Soft Brake
- Brake Freq
- Motor Freq
- Drag Freq
- Cut Off Temp
- Cut Off M-Temp
- B.E.C Voltage
- Motor Pole Num
- Gear Ratio
- Tire Diameter
- Motor-Wiring
- Units
- Download
- Factory Setting
- Current Voltage
- Current Temp
- Max Temperature
- Motor Temp
- Motor Max Temp
- Max Current
- Maximum Speed
- Maximum RPM
- Error History
Specification
- Motor Type - Sensored / 4Pole Sensored
- Motor Limit - >3.5T
- Operating voltage - 3.7-7.4V
- Forward / Brake / Reverse - yes
- Full aluminum case / heatsink - yes
- Typ. Voltage Drop @20A per phase - 0.0048V
- Rated Current per phase - 2549A
- Plugged 30x30x10mm Fan - yes
- BEC Output - 6V/7.4V Bulit-in DC Booster, Continuous Current of 3A
- Multi-Protection-System - yes
- “Boost 0” Mode - yes
- Multi-frequency system - yes
- Power Wires - 12Awg
- USB Software Updateability - yes
- Case Size(with out fan) - 32.9 x 34.6 x 21mm
- Weight(with out cable) - 50g
R1 Wurks 040007 Digital 3 Speed Controller
R1 WURKS DIGITAL 3 SPEED CONTROLLER
ROAR APPROVED!
Note: This ESC no longer supports 1S Batteries (1/12th) via B.E.C. An additional voltage booster must be installed.
FEATURES
- Full aluminium case and heat sink design
- Full compatibility with modified and stock racing
- Superlative FET and low-resistance power PCB design
- 30mm fan for maximum cooling
- Software/hardware upgrades increase speed by reducing motor temperature by modifying the commutation algorithm
- New turbo / boost timing setting and delay time setting
- New brake response mode and PWM / brake frequency allows various race and control types
- Data port for connecting to WiFi module
- WiFi module allows program parameter settings and firmware upgrades
- ESC and motor telemetry (speed, temperature, current, voltage, RPM and battery consumption) can be stored in real time with the data log
Programmable Items
- Model Type
- Select Battery
- Cut Off Voltage
- Power Curve
- Boost Max+TB
- Boost-TH. Limit
- Boost Min-rpm
- Boost Max-rpm
- Turbo Delay
- Turbo + Slope
- Turbo - Slope
- Acceleration
- Start Power
- Smooth Start Rate
- Smooth Start Range
- Reverse Function
- Reverse Delay
- M- Reverse Amount
- Neutral Width
- Motor Direction
- Brake Response
- FAN Control
- Drag Brake
- Min Brake Amount
- Mid Brake Amount
- Mid Brake Location
- Max Brake Amount
- Soft Brake
- Brake Freq
- Motor Freq
- Drag Freq
- Cut Off Temp
- Cut Off M-Temp
- B.E.C Voltage
- Motor Pole Num
- Gear Ratio
- Tire Diameter
- Motor-Wiring
- Units
- Download
- Factory Setting
- Current Voltage
- Current Temp
- Max Temperature
- Motor Temp
- Motor Max Temp
- Max Current
- Maximum Speed
- Maximum RPM
- Error History
Specification
- Motor Type - Sensored / 4Pole Sensored
- Motor Limit - >3.5T
- Operating voltage - 3.7-7.4V
- Forward / Brake / Reverse - yes
- Full aluminum case / heatsink - yes
- Typ. Voltage Drop @20A per phase - 0.0048V
- Rated Current per phase - 2549A
- Plugged 30x30x10mm Fan - yes
- BEC Output - 6V/7.4V Bulit-in DC Booster, Continuous Current of 3A
- Multi-Protection-System - yes
- “Boost 0” Mode - yes
- Multi-frequency system - yes
- Power Wires - 12Awg
- USB Software Updateability - yes
- Case Size(with out fan) - 32.9 x 34.6 x 21mm
- Weight(with out cable) - 50g
| SKU | 040007 |
| Brand | R1 Wurks |
| Shipping Weight | 0.0300kg |
| Shipping Width | 0.080m |
| Shipping Height | 0.010m |
| Shipping Length | 0.080m |
| Shipping Cubic | 0.000064000m3 |
-
Store StockBackorder
-
Warehouse StockBackorder
In-stock items and stock levels are subject to change. If a stock error occurs, our team will notify you. Products may have different processing times depending on their stock location. Please check your cart for each item’s estimated dispatch time before completing your order. Processing time is separate from the carrier’s delivery time. Orders containing items from multiple locations will be dispatched once all items have arrived at our Campbelltown store and are ready to be sent together. Orders containing LiPo batteries, fuel or rocket engines will be sent via Standard Post. If you select Signature Not Required and your parcel is lost after being recorded as delivered, Campbelltown Hobbies cannot be held responsible for its replacement.